Our warranty is included on the invoice that you receive when the work is done and the care/maintenance sheet is stapled to that same invoice. For those who are inquiring about our service or for those who have used us in the past but have lost their invoice and care sheet, below is the information you need.

Warranty ( Verification of Completed Work )

I have reviewed the resurfacing job completely by the LECTROGLAZ Technician signed below and have found it satisfactory. I have received, read and understand the ” CARE AND MAINTENANCE INSTRUCTIONS”. I understand the resurfaced item is guaranteed for five years from date the original work was completed, and that no claims resulting from misuse, chips, scratches or worn surfaces can be honored. I also understand that if, upon inspection, the material and/or application prove defective, LECTROGLAZ’s obligation will be to repair the defective portion only.

Care And Maintenance

• Do not use surface for 2 to 3 days from this date:______________________ temperature must be maintained at 70 degrees or above during those days.
• Although the refinished surface can be put back into service after this time, the surface will actually require up to 90 days to fully cure.
• Clean finish regularly with a non-abrasive, non-bleach cleaner that is safe for an acrylic surface, using a ScotchBrite light-duty sponge.
• Do not lay soap, shampoo bottles, or any other objects on finished surface. We prefer the use of a shower caddy instead.
• Faucets must be properly maintained by the owner and user. Leaky faucets WILL erode the new finish, causing damage to drain area.
• Destruction of the finish may occur through improper use of acid bearing compounds, such as drain openers or tile grout cleaners. All Chemicals must be kept away from the finish such as, but not limited to, cosmetics, hair dyes, bleach, medicines, perfumes, of which may stain or mar the finish.
• Do not use a bathmat with suction cups – installation of a permanent anti-slip bottom is available at a small extra cost.

Even though the refinishing process has been around for a long time, there are many questions and uncertainties concerning it. Some of those uncertainties are caused by unscrupulous  companies with their poor workmanship and poor materials. Make sure you use a refinishing company that

a pharmacie de mes rêves en france au centre de paris

has been around for a long time and has a good reputation.

QUESTIONS and ANSWERS

Q: What is the Lectroglaz finish?
A: Lectroglaz finish is a thermal bond cross-linked acrylic resin. It is a one of a kind system that is green federal compliant coating. The Lectroglaz finish is extremely durable and hard, but at the same time very flexible.

Q: What fixtures can be refinished?
A: Bathtubs, sinks, wall tile, acrylic/fiberglass units and showers, cultured marble and countertops. All damaged areas are repaired and fixture sprayed with super-smooth, high gloss finish in any color.

Q: How long does it take to refinish?
A: Tubs, sinks, and enclosures can take 4 to 6 hours.

Q: How long before can I use the fixture?
A: Most fixtures can be used with in 48 hours.

Q: What do I need to do before I have the refinishing done?
A: Make sure the drain is free flowing and the faucet is not dripping. Also remove all loose objects in bathroom such as towels, toiletries, and shower curtain.

Q: In the process of remodeling, when should the refinishing be scheduled?
A: Always call ahead for proper scheduling.

Q: How long will the Lectroglaz finish last?
A: The Lectroglaz system comes with a five year warranty and with proper care, should give you many years of satisfaction.

Q: How do I take care of the new surface?
A. Our beautiful, shiny and glossy finish is durable, strong, and easy to care for. Just wipe clean with any mild liquid cleaner, that is safe for acrylic, and a soft cloth or sponge.

Q: Why shouldn’t I consider a new tub or a plastic tub-liner?
A: The cost of refinishing is considerably less than the cost of replacing or installing a tub-liner.

Tumeur du foie : pronostic en fonction du stade, du grade et du risque

Most tub-liners fail because water gets under the drain and or behind the caulking. This causes water to get trapped and stagnant between the old tub surface and the new plastic liner. Installing a new tub will include the added cost of replacing plumbing fixtures, wall board, wall tile, pipes, etc. With refinishing, your bathtub or wall tile will look brand new at a fraction of the cost, and with no mess to clean up.